Heat Press Instructions
Color Ribbon : Do not press the color ribbon that runs along the transfer roll, as it will not come off the shirt.
1st Press : Apply FIRM PRESSURE at 300-315 degrees for 10-13 seconds with the image in the proper placement. Experiment with your heat press for optimal results.
Cold/Hot Peel :
- Cold Peel : Let the transfer cool completely before removing the film. Rub the film with cloth if necessary. (PREFERRED)
- Hot Peel : Immediately with one swift motion peel off the film.
- Warm Peel : You can peel it off when warm gently as well.
You can peel as you would like, we strongly suggest COLD PEEL.
2nd Press : Apply FIRM PRESSURE at 300-315 degrees for 3-5 seconds.
Note : FIRM and EVEN pressure is important for good adhesion. Avoid any pockets, seams, buttons, zippers, etc. within the press area.
Polyester/Blend Fabric : Lower the temperature to 300~ degrees and shorten the time to 10-12 seconds, as these fabrics absorb heat at a faster rate. Press multiple times if needed with cooling time in between.
100% Polyester : Lower the temperature to 250-285 degrees and shorten the press time to 3-8 seconds. Practice to determine the best time, temperature, and pressure. Press multiple times if needed with cooling time in between.